Good parking racks are hard to come by, so with our experience in fabrication and metal finishing, we introduced the PostUp in both black powder coated steel and stainless steel to provide a high quality, efficient bike parking solution.
The Inverted-U style is preferred over other designs by municipalities, urban planners, architects, parks departments and most importantly, cyclists. Alternative styles of parking racks (ie. the Wave or Grid designs) do not efficiently or safely allow for bikes to be locked to them. Many times they end up with only 2 bikes on either end due to the lack of space for allowing the frame to be directly locked to the rack. The Inverted-U design is efficient and safe by allowing for the space on either side of the rack to be utilized without having users lift their bikes, or move other bikes to get close enough for u-locks. This allows for more bikes in a smaller area, while the rack itself is not intrusive into the space.
Click here for the City of Sacramento’s Design Guide, note that most designs are banned except for the Inverted-U style of rack.
There is no “standard” for parking racks however, some municipalities have created their own specifications for size, tubing diameter, and materiality. Our PostUp meets or exceeds most of these specs, but it is impossible to check all the boxes given some of these complicated regulations. Most cities do not have any requirements.
Click Here for the City Of Denver's code as an example
Both PostUp and PostUp SS come complete with concrete inserts, theft deterrent mounting bolts, a 6mm driver to install the bolts, properly sized concrete drill bit and installation guide. You only need to supply the hammer drill (SDS-Plus style chuck) for installation. The PostUps are packed one per box with foam packing to ensure they arrive undamaged.
- 2” (50mm) round tubing with 5/32” wall (4mm) is ideal size for locking bicycles
- Black Model is made with ASTM A36 Steel Tubing
- Stainless Model is made with 304 Stainless Steel Tubing
- Sturdy 3/8” (10mm) base plates with six mounting bolts are ideal for distributing the load and securing to the concrete (not recommended for asphalt)
- Carbon steel frame is ED coated prior to application of a 20 year commercial/architectural grade powder coating. Stainless is sand blasted with a passivation treatment for a clean long lasting finish. Set it and forget it
- Includes all concrete inserts, theft deterrent bolts, 3/8" socket wrench driver and concrete drill bit (SDS-Plus Shank) for seamless install
- Subtle reflective band provides dynamic appearance and visibility at night
- Each rack quality checked for imperfections and tolerance
- Free same day shipping by 2pm, rack will arrive at locations in the USA within 5 business days
- Sales outside of Colorado are non-taxable
- Simple and Easy, the way life should be
1-4 pcs-$199.95 each (UPS Ground, free shipping, 2-5 business days)
5-9 pcs $189.95 each (UPS Ground, free shipping, 2-5 business days)
10+ pcs $179.95 each (ships on pallet, free shipping, 2-5 business days)
Do you offer this model with in ground mounting? No. Water runs down the tubing and these begin rusting within two years. In addition, if a vehicle or other piece of equipment hits it, you need to tear up the concrete to replace it. Surface Mount style are the most durable and can be replaced if damaged
How quickly will it ship and arrive? We will ship the same day on orders placed before 2pm Mountain Time. WestCoast shipping is 3 business days, East Coast shipping is 4 business days, and Rocky Mountain/midwest region shipping is 2 business days.
What if we hate it? No problem, we will send you a free return label and a thousand pardons
Can I install myself? If you have some experience drilling concrete and installing concrete anchors, yes. If you have never installed anything in concrete, please hire someone. If you do not do it properly, you may end up with extra holes in the concrete and a wobbly bike rack.
Can I used a regular drill? This will take much longer than a true hammer drill, also the included SDS drill bit does NOT fit a standard drill chuck.
What kind of drill do I need to install? We include an SDS-Plus concrete drill bit. SDS-Plus is the standard for hammer drills and fits most hammer drills made in the last five years. We use an Enearcro for our shop installations, this works well and will make quick work of installation see it here: Enearco Hammer Drill on Amazon
Any tips for installation? Please review the instruction manual with a spacing guide. The city of Sacramento also has a great guide for Bike Parking Layout.
- Please have a few bicycles at your disposal during installation to test your layout and confirm the bikes do not protrude into walkways and pedestrian corridors.
- If you get them too close to walls or each other, they can be difficult to use
- Make sure users are clear of traffic while locking and unlocking their bikes
- Place in well lit areas to minimize theft
Questions or concerns? Happy to help, 303-402-0190 or email@example.com. We have humans to talk to you M-F 9-5 Mountain Time. The crew at RockyMounts